For industrial equipment / PFC function DRP-480-24 Din Rail switching power supply high quality 480W 24V 20A power supply
480W Single Output Industrial DIN Rail Power Supply DRP-480 series
Features:
Universal AC input/ full range
Built-in active PFC function
Protections: Short circuit/ Over load/ Over voltage/ Over temperature
Cooling by free air convection
Can be installed on DIN rail TS-35/7.5 or 15
LED indicator for power on
100% full load burn-in test
Fixed switching frequency at 100KHz
2 years warranty
SPECIFICATIONS |
OUTPUT | |
Model | DRP-480-24 | DRP-480-48 |
DC Voltage | 24V | 48V |
Rated Current | 20A | 10A |
Current Range | 0-20A | 0-10A |
Rated Power | 480W | 480W |
Ripple & Noise | 80mVp-p | 150mVp-p |
Voltage Adj. Range | 24-28V | 48-53V |
Voltage Tolerance | ±1% | ±1% |
Setup, Rise Time | 800ms,40ms/230VAC 800ms,40ms/115VAC at full load |
Hold Up Time | 24ms/230VAC 24ms/115VAC at full load |
| |
INPUT | |
Voltage Range | 85~264VAC 47~63Hz; 120~370VDC |
AC Current | 2.8A/115V 1.4A/230V |
Efficiency | 84% | 85% |
Inrush Current | Cold start 27A/115V 45A/230V |
Leakage Current | <3.5mA/240VAC |
| |
PROTECTION | |
Over Load | 105%~150% |
Protection type: Constant current limiting, recovers automatically after fault condition is removed |
Over Voltage | 30-36V | 54-60V |
Protection type: Shut down o/p voltage, re-power on to recover |
Over Temp. | 100℃±5℃(TSW1) |
Protection type: Shut down o/p voltage, recovers automatically after temperature goes down |
| |
ENVIRONMENT | |
Working Temp., Humidity | -10℃~+70℃; 20%~90%RH |
Storage Temp., Humidity | -20℃~+85℃; 10%~95%RH |
Vibration | 10~500Hz, 2G 10min./1cycle, period for 60min, each along X, Y, Z axes |
| |
SAFETY | |
Withstand Voltage | I/P-O/P: 3KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC |
Isolation Resistance | I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC |
| |
STANDARD | |
Safety Standard | Design refer to UL508,UL60950-1, TUV EN60950-1 |
EMC Standard | EN55011,EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11,ENV50204,EN55024,EN61000-6-2(EN50082-2) |
| |
OTHERS | |
Dimension | 227*125.2*100mm(L*W*H) |
Weight | 2.5Kg |
Packing | 12pcs/carton |
| |
NOTE | |
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 5. Derating may be needed under low input voltages. Please check the derating curve for more details. |
FAQ
Q 1. Are our products durable ?
A. 1.We offer 2-year-warranty
2.The tech support & parts replacement are offered for free
3. Our products are also used in our own office and workshop
4. The components used are of quality insurrance
5. All the products must be tested before being shipped
6. We own CE CCC RoHS ISO9001 IP67certificates
7. Our company has been engaged in designing and manufacturing power supply for more then 10 years
Q 2. How to contact us?
A. Send your Inquiry Details in the Below, Click "Send" Now !