SPECIFICATIONS   CE RoHS 45w 12V 24V Din Rail Led Driver

INPUT

Voltage Range    85~264VAC   47~63Hz; selected by switch 120~370VDC

AC Current      1.5 A/115 V 0.75A/ 230 V

Efficiency        72%(HDR-45-5); 77%(HDR-45-12); 77%(HDR-45-15); 80%(HDR-45-24)

Inrush Current    Cold start 28A/115V 56A/230V

Leakage Current  <1mA/240VAC

PROTECTION

Over Load 105%~150%

Protection type: Constant current limiting, recovers automatically after fault condition is removed

Over Voltage 115%~135%

Protection type: Shut down o/p voltage, re-power on to recover

Over Temp.. Tj 135°C typically (U1) Detect on heat sink of power transistor,shut down o/p voltage, recovers automatically after temperature goes down

ENVIRONMENT

Working Temp., Humidity -10°C~+50°C; 20%~90 %RH

Storage Temp., Humidity -20°C~+85°C; 10%~95 %RH

Vibration 10~500Hz, 2G 10min./1cycle, period for 60min, each along X, Y, Z axes

SAFETY

Withstand Voltage I/P-O/P: 3KVACI/P-FG: 1.5KVACO/P-FG: 0.5KVAC

Isolation Resistance I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC

STANDARD

Safety Standard Design refer to UL508,TUV EN60950-1

EMC Standard Design refer to EN55011,EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11,ENV50204,EN55024,EN61000-6-2

OTHERS

Weight 0.31Kg

Packing 48pcs/16.1Kg/1.3CUFT

NOTE

1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.

2. Ripple & noise are measured at 20MHz of bandwidth by using a 12"twisted pair-wire terminated with a 0.1μ & 47μparallel capacitor.

3.Tolerance: includes set up tolerance, line regulation and load regulation.

4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

OUTPUT