Phone

86-577-62998958
Address

No. 4, South Of Zhanxi Village, Liushi Town, Yueqing, Wenzhou, Zhejiang, China (Mainland)
E-mail

k@waimaotong.com

LatestProducts

Hot Sell

Home > Sell

2 years warranty LED using LRS-75-12 single output power supply 75W 12V 6A switching power supply

2 years warranty LED using LRS-75-12 single output power supply 75W 12V 6A switching power supply

2 years warranty LED using LRS-75-12 single output power supply 75W 12V 6A switching power supply,LEYU,Electrical Equipment & Supplies,Power Supplies,Switching Power Supply

INQUIRY PRECISE INQUIRY

Description

Overview

Quick Details

Place of Origin:: Zhejiang, China (Mainland)

Brand Name:: LEYU

Model Number:: LRS-75-12

Output Power:: 51 - 100W

Output Type:: Single

Input Voltage:: 85 ~ 264VAC

Output Voltage:: 12V

Output Frequency:: 47-63HZ

Output Current:: 6A

Certification:: CE RoHS

Application:: LED lighting / LED equipment

Warranty:: 2 years

Type:: Single Output 75W 12V SMPS

Product Name:: LRS-75-12 75W 12V single output power supply

Efficiency:: 89%

Size:: 99*82*30mm (L*W*H)

Weight:: 0.3Kg/pcs

SupplyAbility

SupplyAbility:: 10000 Piece/Pieces per Month 75W 12V switching power supply

Packaging & Delivery

Packaging Details: With cartons , 45pcs/carton

Port: Ningbo/Shanghai

Lead Time :: Within one week

2 years warranty LED using LRS-75-12 single output power supply 75W 12V 6A switching power supply

75W Single Output Switching Power Supply LRS-75 series

Features:

Universal AC input/ full range

Withstand 300VAC surge input for 5 seconds

Protections: Short circuit / Overload / Over voltage

Cooling by free air convection

LED indicator for power on

100% full load burn-in test

High operating temperature up to 70℃

High efficiency, long life and high reliability

2 years warranty
more efficient, more thinner, less no-load consumption than old series

SPECIFICATION
OUTPUT
Model	LRS-75-5	LRS-75-12	LRS-75-15	LRS-75-24	LRS-75-36	LRS-75-48
DC Voltage	5V	12V	15V	24V	36V	48V
Rated Current	14A	6A	5A	3.2A	2.1A	1.6A
Current Range	0~14A	0~6A	0~5A	0~3.2A	0~2.1A	0~1.6A
Rated Power	70W	72W	75W	76.8W	75.6W	76.8W
Ripple & Noise	100mVp-p	120mVp-p	120mVp-p	150mVp-p	200mVp-p	200mVp-p
Voltage Adj. Range	4.5 ~ 5.5V	10.2~ 13.8V	13.5~18V	21.6~28.8V	32.4~39.6V	43.2~52.8V
Voltage Tolerance	±2.0%	±1.0%	±1.0%	±1.0%	±1.0%	±1.0%
Line Regulation	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%
Load Regulation	±1.0%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%
Setup, Rise Time	500ms, 30ms/230VAC 500ms, 30ms/115VAC at full load
Hold Up Time	60ms/230VAC 12ms/115VAC at full load

INPUT
Voltage Range	85 ~ 264VAC 120 ~ 373VDC
Frequency Range	47 ~ 63Hz
Efficiency	86.50%	89%	89%	90%	91.50%	91.50%
AC Current	1.4A/115VAC 0.85A/230VAC
Inrush Current	Cold start 50A/230VAC
Leakage Current	<0.75mA / 240VAC

PROTECTION
Over Load	110 ~ 150% rated output power
Over Load	Protection type: Hiccup mode, recovers automatically after fault condition is removed
Over Voltage	5.75~6.75V	13.8 ~ 16.2V	18.75~21.75V	28.8 ~ 33.6V	41.4~48.6V	55.2~ 64.8V
Over Voltage	Protection type: shut down o/p voltage, re-power on to recover

ENVIRONMENT
Working Temp.	-30 ~ +70℃ (Refer to “derating curve”)
Working Humidity	20 ~ 90% RH non-condensing
Storage Temp., Humidity	-40 ~ +85℃, 10 ~ 95% RH
Temp. Coefficient	±0.03%/℃ (0 ~ 50℃)
Vibration	10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes

SAFETY & EMC
Safety Standards	UL60950-1, TUV EN60950-1, EN60335-1/-2-16, CCC GB4943 approved
Withstand Voltage	I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.25KVAC
Isolation Resistance	I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃ / 70% RH
EMC Emission	Compliance to EN55022(CISPR22), GB9254 CLASS B, EN55014 EN 61000-3-2,-3
EMC Immunity	Compliance to EN61000-4-2,3,4,5,6,8,11, EN61000-6-2(EN50082-2), heavy industry level, criteria A

OTHERS
Dimension	998230mm (LWH)
Weight	0.3Kg
Packing	45pcs/carton/14.5kg/0.77CUFT

NOTE

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.

2. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

3. Tolerance: includes set up tolerance, line regulation and load regulation.

4. Line regulation is measured from low line to high line at rated load.

5. Load regulation is measured from 0% to 100% rated load.

6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

7. Length of set up time is measured at cold first start. Turning ON/OFF the power supply very quickly may lead to increase of the set up time.